Overview - Lower Rear Lid Trim Panel, Sedan

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Lower Rear Lid Trim Panel, Sedan

Courtesy of AUDI OF AMERICA, LLC

Plugs
- For the emergency release
- Clipped in the rear shelf trim
Bolt
- 1.8 Nm
Release Lever
- For the emergency release
- Market-specific
Emergency Release
- Market-specific
Rear Lid Lock Button In Luggage Compartment -E406-
- Removing and installing. Refer to REAR LID LOCK BUTTON IN LUGGAGE COMPARTMENT -E406-, REMOVING AND INSTALLING .
Trim Panel
- For rear lid lock
- Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Press on until it engages audibly
Stop Strip
- Quantity: 2
- Clip into rear lid
Rear Lid Hinge
- Quantity: 2
- Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
Expanding Clip
- Quantity: 2
Rear Lid
Lock Washer
- Quantity: 8
Clip
- Quantity: 11
- Insert in the trim panel
- Remove any remaining rear lid clips using Omega Clip Tool :T40280 and use them to install the trim.
- Replace damaged or deformed clips
Rear Lid Trim
- Removing and installing. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING, SEDAN .
- Press on until it engages audibly
Pull Handle
- Attached using lock washers on the rear lid trim panel
Bolt
- 1.8 Nm
- Quantity: 2
Bracket
- For the warning triangle
- Removing and installing. Refer to EMERGENCY TRIANGLE BRACKET, REMOVING AND INSTALLING .
- Insert and press on it until it audibly latches
Warning Triangle