Seat Position Sensor, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The seat position sensor is provided as a replacement part with the wiring harness and the black 10-pin harness connector. The following wires with connectors are contained in the wiring harness:

Wire with seat belt latch coupling connector (driver seat).
Wire with seat belt latch coupling connector (passenger seat).
Wire with Front Passenger Occupant Detection Sensor -G128- coupling connector.
Market-specific: wire with Passenger Occupant Detection System Control Module -J706- coupling connector with Passenger Occupant Detection System Pressure Sensor -G452-.