Seat Belt Height Adjuster, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Press button for seat belt height adjuster and move the slide for seat belt height adjustment into the lowest position.
-- Remove the upper B-pillar trim panel. Refer to UPPER B-PILLAR TRIM, REMOVING AND INSTALLING .
-- Set aside the upper B-pillar trim with the seat belt still threaded through it.
-- Remove the bolt -1-.
-- Remove the seat belt relay -4- and seat belt.
-- Remove the bolt -2-.
-- Remove the seat belt height adjuster -3- at the top of the B-pillar.