LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Airbags And Restraint Systems (Service Information)) >> Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Rear Seat Belt Guide, Removing And Installing >> Rear Seat Belt Guide, Removing And Installing, AVANT >> Installing

Rear Seat Belt Guide, Removing And Installing, AVANT: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following: 

-- Insert the belt into the depression in the belt guide -3- and then place the belt guide on onto the bracket.

-- Insert the belt guide with the bolt heads -2- in the guides on the bracket.

-- Press the belt guide down while pulling it forward. This engages the bolt heads in the guides.

-- Pull the belt webbing forward until the retaining hooks engage audibly.

scientia non olet · About LEMON Manuals