LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Airbags And Restraint Systems (Service Information)) >> Passenger Protection, Airbags, Seat Belts >> Passenger Occupant Detection System >> Passenger Occupant Detection System, Removing And Installing >> Removing >> Multi-Contour Seat

Multi-Contour Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The Passenger Occupant Detection System Pressure Sensor -G452- is sewn in the seat cover with the seat heating element.

-- Remove seat cover with seat cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, MULTI-CONTOUR SEAT .

-- Separate the seat cover from the seat cushion. Refer to SEAT PAN COVER AND CUSHION, SEPARATING, MULTI-CONTOUR SEAT .

scientia non olet · About LEMON Manuals