Front Passenger Airbag Deactivation Key Switch, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .

-- Disconnect the battery Ground (GND) cable with the ignition turned on. Refer to BATTERY .

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Press the catch -1- in direction of the -arrow- until the connector disengages.

-- Disconnect the connector -2-.

-- Release the springs -3 and 5- and push the Front Passenger Airbag Deactivation Key Switch -E224- -4- out of the key switch housing.