Mechatronic, Transmission Control Module -J217-, Sensor and Pressure Regulating Valves - Part 1
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Component location: The Mechatronic unit is bolted to the bottom of the transmission housing and is covered by the transmission fluid pan.
The Mechatronic unit incorporates the hydraulic control, the transmission control module, the multifunction transmission range switch and the sensors and actuators as a complete synchronized unit. The following are part of:
- Automatic Transmission Pressure Regulating Valve 8 -N510-, depending on the date of manufacture, also Solenoid Valve 1 -N88-
- Automatic Transmission Pressure Regulating Valve 7 -N443-
- Automatic Transmission Pressure Regulating Valve 6 -N371-
- Transmission Output Speed Sensor -G195-
- Automatic Transmission Pressure Regulating Valve 3 -N217-
- Automatic Transmission Pressure Regulating Valve 5 -N233-
- Automatic Transmission Pressure Regulating Valve 2 -N216-
- Automatic Transmission Pressure Regulating Valve 4 -N218-
- Automatic Transmission Pressure Regulating Valve 1 -N215-