Component Location Overview - Seals
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Seal
- For the torque converter
- Remove Torque Conveter. .
- Left Seal
- For the flange shaft
- Replacing. Refer to LEFT SEAL, REPLACING .
- O-Ring
- On the front final drive cover
- Replacing. Refer to FRONT FINAL DRIVE COVER O-RING, REMOVING AND INSTALLING .
- Front Final Drive Cover
- Removing and installing. Refer to FRONT FINAL DRIVE COVER O-RING, REMOVING AND INSTALLING .
- Right Seal
- For the flange shaft
- Replacing. Refer to RIGHT SEAL, REPLACING .
- Seal
- For the transmission output shaft.
- Replacing. Refer to Self-Locking Center Differential
- Seal
- For the selector shaft
- Replacing. Refer to SELECTOR SHAFT SEAL, REPLACING .
- Transmission