Component Location Overview - Drain And Check Plugs
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Automatic Transmission Fluid (ATF) Drain Plug
- Always replace
- 12 Nm
- Drain Plug
- 12 Nm
- For the transmission fluid inside the transfer case
- Sealing Plug
- 27 Nm
- For the hole for checking and filling
- For the transmission fluid inside the transfer case
- ATF Plug
- 30 Nm
- Always replace
- For the hole for checking and filling
- For the ATF in the transmission
- Sealing Plug
- 27 Nm
- For the hole for checking and filling
- For the transmission fluid inside the front final drive
- Drain Plug
- 10 Nm
- For the transmission fluid inside the front final drive