Gear Oil Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear noise insulation -2-. Refer to NOISE INSULATION .

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Use a cloth to catch any leaking coolant.

-- Disconnect the coolant hoses with :3094 .

-- Loosen the clamps -1- and remove the coolant hoses.

Courtesy of AUDI OF AMERICA, LLC

-- Place the :SMN372500 under the transmission.

-- Remove bolt -3-, remove front final drive cooler -4-.