Left Flange Shaft, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Secure the transmission on the :VAS6095 . Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .

-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left flange shaft -1- from the transmission in the direction of -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -arrow B-.

-- Remove the torque converter. .