LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 945 (Differential & Driveshaft System (Service Information - 8-Speed Automatic - 0BK AWD)) >> Final Drive, Differential >> Differential >> Left Flange Shaft, Removing And Installing >> Installing >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Tighten the left flange shaft mounting bracket -arrows-.

GWWA30-10170Courtesy of AUDI OF AMERICA, LLC

-- After installing the transmission, check the axle oil level in the front final drive. Refer to GEAR OIL, CHECKING LEVEL .

scientia non olet · About LEMON Manuals