S tronic Transmission 0CK Transmission Mount

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: S tronic Transmission Mount Exploded View

Courtesy of AUDI OF AMERICA, LLC

Tunnel Crossmember
- Removing and installing. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT .
Nut
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
Transmission Support
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
Transmission Mount
- Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH DSG TRANSMISSION 0BZ .
Stop
- For the transmission mount
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .