Wire Routing on the Left and Right Side Version 2

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the left and right connectors -2- for the Left Electrohydraulic Engine Mount Solenoid Valve -N144- /Right Electrohydraulic Engine Mount Solenoid Valve -N145- and remove them from the bracket.

Continuation for All Vehicles

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right bolts -1 and arrows-, set aside the retaining plate.

NOTE:

Ignore item -2-.

-- Lift the engine using the :10-222A/11 -1- on the respective side to dimension -a-.

Courtesy of AUDI OF AMERICA, LLC

Dimension -a- = approximately 20 mm.

-- Remove the engine mount.