Engine And Transmission, Separating, Vehicles With Automatic Transmission: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Scissor Lift Table :VAS6131B
- Scissor Lift Table - Audi Set :VAS6131/10
- Articulated Joint Support :VAS6131/13-7 from the Scissor Lift Table - Q7 Set :VAS6131/13
- Scissor Lift Table - Gearbox Support :VAS6131/14
- Spindle :3367/3 from Press Tool For Viscous Fan :3367
- Engine Support :T10014
- Crankshaft Turning Tool :T40257
- Wrench - 21mm :T40263
- Adapter :T40314
- Engine Bung Set :VAS6122
Preparing the :VAS6131/13-7 :
- :3367/3 from :3367
- M10 nut
- :T10014
- :VAS6131/13-7
- Engine/transmission assembly removed and placed on the :VAS6131B .