Audi RS6/RS7
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right bolt -arrow-, free up the bracket with the wiring harness.
Continuation for All Vehicles
-- Disconnect the connectors -2 and 3- and free up the wires.
-- Remove the left and right bolts -1-.
-- Remove the bolts -arrows-.
-- Lift the engine using the :10-222A/11 -1- to dimension -a-.
- Dimension -a- = approximately 20 mm.
-- Remove the retaining plate for the engine mount and the right engine mount.