LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 943 (Engine Assembly-CEUC, CRDB, CTGE, CWUB, CWUC) >> Engine Assembly >> SUBFRAME Mount >> Electro-Hydraulic Engine Mount, Calibrating >> Notes

Electro-Hydraulic Engine Mount, Calibrating: Notes

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

A calibration must be performed only on electro-hydraulic engine mounts with Subframe Mount Sensor 1 -G748- and Subframe Mount Sensor 2 -G749- as well as Subframe Mount Actuator 1 -N513- and Subframe Mount Actuator 2 -N514-.

Special tools and workshop equipment required 

scientia non olet · About LEMON Manuals