Overview - Transmission Mount

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Transmission Mount Exploded View

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification:
  - Remove Assembly Mounts. .
Tunnel Crossmember
- Removing and installing:
  - Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
  - Remove Assembly Mounts. .
Stop
- For the transmission mount
Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specification:
  - Remove Assembly Mounts. .
Nut
- Tightening specification:
  - Remove Assembly Mounts. .
Bolt
- Tightening specification:
  - Remove Assembly Mounts. .
Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specification:
  - Remove Assembly Mounts .
Nut
- Tightening specification:
  - Remove Assembly Mounts. .