Applies to Power Steering Column
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the connector -arrow- and free it up.
-- Disconnect and free up the connectors -1, 2 and 3- for the dynamic steering (if equipped).
Applies to All
-- Remove the steering column bolts -1 through 7- on the central tube while supporting the steering column from below with the hand.
-- Pull the steering column back slightly, disengage it from the positioning holes -arrows- on the central tube and lower it.
-- Disconnect the connector -1- from the Electronic Steering Column Lock Control Module -J764- for vehicles with the lock lock-up system, free up the wiring harness -2- and remove the steering column.