Rear Door Latch and Door Lock Actuator Assembly: Removal
WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground cable from battery.
- Remove the rear door trim. < Ref. to REAR DOOR , REMOVAL, Door Trim . >
- Remove the wire from the rear inner remote. < Ref. to REMOVAL , Rear Inner Remote . >
- Remove the sealing cover. < Ref. to REMOVAL , Rear Sealing Cover . >
- Remove the rear door glass. < Ref. to REMOVAL , Rear Door Glass . >
- Disconnect the harness connector of rear door latch and door lock actuator assembly.
- Remove the screws, and remove the rear door latch & door lock actuator assembly.