LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Engine Cooling System (Service Information - CREC, CREH)) >> 19 Cooling System >> Radiator/Coolant Fan >> Radiator, Removing And Installing >> Installing

Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

If there are small impressions on the fins. Refer to COOLER AND CONDENSER ASSEMBLY .

-- Electrical connections and wiring routing. Refer to the appropriate WIRING DIAGRAM.

-- Connect the connection and coolant hoses with the connector coupling. Refer to Figure- Replace the damaged clip -4-.

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to FILLING .

scientia non olet · About LEMON Manuals