Coolant Fan -V7-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
During installation, all cable ties must be installed at the same location.
-- Remove the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .
-- Remove the bolts -1 or 2- and remove the fan wheel.
-- Remove the coolant fan bolts -arrows-.
-- Free up the wiring harness and remove the coolant fan.