Auxiliary Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front noise insulation. Refer to NOISE INSULATION .
-- Remove the left front wheel housing liner. Refer to WHEEL HOUSING LINER .
-- Remove the front bumper cover. Refer to ATTACHMENTS, REMOVING AND INSTALLING .
-- Unclip air duct -1- and remove in direction of -arrow-.
-- Place the :VAS6208 underneath.
-- Clamp off and remove the coolant hoses with the :3094 by loosening the hose clamps -arrows-.
-- Remove the screws -2-.
-- Remove radiator -1- from the bracket from above.