Coolant Valve, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear noise insulation. Refer to NOISE INSULATION .
-- Remove the bolts -arrows- and remove the heat shield -3-.
-- Disconnect the connector -1-.
-- Loosen the hose clamps -2-, then clamp off the coolant hoses with the :3094 and remove them.
-- Remove the Transmission Fluid Cooling Valve -N509-.