Right Coolant Pipe On Transmission, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the plenum chamber bulkhead. Refer to BULKHEAD .
-- Remove the bolts -arrows-.
-- Remove the coolant hoses by loosening the hose clamps -1 and 2-.
-- Coolant pipe on the right side of the transmission