Left Coolant Pipe On Transmission, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the bolt -2- and the nut -3-.

-- Loosen the hose clamp -1- and remove the coolant hose.

-- Remove the coolant pipe on the left side of the transmission.

NOTE:

Ignore item -4-.