LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Engine Cooling System (Service Information - CREC, CREH)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Front Left Coolant Pipe, Removing And Installing >> Installing

Front Left Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the seal after removal.

Secure all hose connections with hose clamps. Refer to the parts information.

-- Install the left front coolant pipes. Refer to FRONT LEFT COOLANT PIPES, REMOVING AND INSTALLING .

-- Connect the coolant hoses and connections with the connector coupling. Refer to Figure- Replace the damaged clip -4-.

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to FILLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals