LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 939 (Engine Cooling System (Service Information - CREC, CREH)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Compressor Coolant Pipes, Removing And Installing >> Installing

Compressor Coolant Pipes, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replacing the seals after removal.

Secure all hose connections with hose clamps. Refer to the parts information.

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to FILLING .

scientia non olet · About LEMON Manuals