Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fin.

-- Electrical connections and wiring routing. Refer to the appropriate WIRING DIAGRAM.

-- Connect the coolant hose to the coupling. Refer to Figure.

-- Install the charge air cooler. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to CHECK THE COOLANT LEVEL .