Engine Temperature Control Temperature Sensor -G694-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is cold.
-- Briefly open the coolant reservoir cap -arrow- to reduce the residual pressure in the coolant system.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
NOTE:
Use a cloth to catch any leaking coolant.
-- Remove the bolt -2- and remove the Engine Temperature Control Sensor -G694-.