LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Engine Cooling System (Service Information - CPNB)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING >> Installing

Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

Replace the O-rings.

Insert the new Engine Coolant Temperature Sensor on Radiator Outlet -G83- immediately to prevent coolant loss.

-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .

scientia non olet · About LEMON Manuals