Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear noise insulation. Refer to NOISE INSULATION .
Vehicles with S tronic Transmissions 0B5 or 8-speed Automatic Transmissions 0BK:
-- Disconnect the connector -2-.
-- Loosen the hose clamps -1-, then clamp off the coolant hoses with the :3094 and remove them.
-- Remove the bolts -arrows- and then remove the Transmission Fluid Cooling Valve -N509-.