LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 938 (Engine Cooling System (Service Information - CPNB)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Valve, Removing And Installing >> Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING >> Installing

Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following: 

NOTE:

To prevent coolant loss, immediately insert the new Transmission Fluid Cooling Valve -N509-.

Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the parts information.

-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .

scientia non olet · About LEMON Manuals