Overview - Fan Shroud And Radiator Fan
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
There is a risk of injury if the radiator fan turns on by itself.
- Disconnect the connectors before working near the fan shroud.
- Coolant Fan 2 -V177-
- With Coolant Fan Control Module 2 -J671-
- Removing and installing. Refer to Coolant Fan -V7-, REMOVING AND INSTALLING
- Coolant Fan -V7-
- With Coolant Fan Control Module -J293-
- Removing and installing. Refer to Coolant Fan -V7-, REMOVING AND INSTALLING .
- Fan Shroud
- Removing and installing:
- S6/RS6/RS7 together with the radiator. Refer to RADIATOR, REMOVING AND INSTALLING, AUDI S6/S7 .
- S7. Refer to FAN SHROUD, REMOVING AND INSTALLING .
- Removing and installing:
- Bolt
- 3.5 Nm
- Air Guide
- Fan Wheel
- The bolt must lock into the hole.
- Bolt
- 5 Nm
- Fan Wheel
- The bolt must lock into the hole.
- Bolt
- 5 Nm
- Air Guide
- Bolt
- 3.5 Nm