Right Auxiliary Cooler, Removing And Installing, AUDI RS6/RS7: Removing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front right wheel spoiler. Refer to WHEEL HOUSING LINER .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

Audi RS6

-- Remove the right headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .

Audi RS7

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Open the retaining tabs in direction of -arrows-, remove the air duct -1- from the front.

-- Remove the nut -arrow- and free up the coolant line -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

Courtesy of AUDI OF AMERICA, LLC

-- If the auxiliary cooler is replaced, remove bolt -4- and bracket -2-.

-- Place the :VAS6208 underneath.

-- Remove the coolant hoses, to do so, loosen the hose clamps -arrows-.

-- Remove the right auxiliary cooler.