Overview - Coolant Pump/Thermostat
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Housing
- For the coolant pump
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Coolant Connection
- O-Ring
- Always replace
- Bolt
- Steel bolt: 9 Nm
- Aluminum bolt: 8 Nm + 90°
- Always replace
- O-Ring
- Always replace
- Bolt
- 9 Nm
- Coolant Connection
- O-Ring
- Always replace
- Intermediate Pipe
- O-Ring
- Always replace
- Bolt
- 5 Nm + 90°
- Always replace
- Coolant Shut-Off Valve
- Removing and installing. Refer to COOLANT SHUT-OFF VALVE, REMOVING AND INSTALLING .
- O-Ring
- Always replace
- Coolant Connection
- Bolt
- 9 Nm
- Coolant Connection
- Seal
- Always replace
- Bolt
- 9 Nm
- Coolant Hose
- O-Ring
- Always replace
- Input Shaft
- For the coolant pump
- O-Ring
- Always replace
- Coolant Pump
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Seal
- Always replace
- Seal
- Always replace
- Map Controlled Engine Cooling Thermostat -F265-
- Removing and installing. Refer to Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .
- Thermostat opening data. Refer to COOLANT THERMOSTAT, CHECKING
- Bolt
- 9 Nm