Engine Coolant Temperature Sensor on Radiator Outlet -G83-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the O-ring.
To prevent coolant loss, immediately insert new Engine Coolant Temperature Sensor -G62- in the connections.
-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .