Engine Coolant Temperature Sensor -G62 - / Engine Temperature Control Sensor -G694-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings.

Audi S6/RS6/RS7

-- Install the radiator, with the fan shroud. Refer to RADIATOR, REMOVING AND INSTALLING, AUDI S6/S7 .

Audi S7

-- Install the fan shroud. Refer to FAN SHROUD, REMOVING AND INSTALLING .

Continuation for All Vehicles

-- Check the coolant level. Refer to CHECK THE COOLANT LEVEL .