Engine Coolant Circulation Pump 2 -V178-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the parts information.
When installing, bring all cable ties back to same positions.
-- Install the catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .
-- Install the wires. Refer to Release Tool SetVAS1978/35Relay and Fuse Panels in E-Box, Removing and Installing , and refer to the appropriate WIRING DIAGRAM.
NOTE:
Do not reuse used coolant.
-- Fill with coolant. Refer to FILLING .