Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear noise insulation. Refer to NOISE INSULATION .
-- Remove the bolts -arrows- and remove the heat shield -3-.
-- Disconnect the connector -1-.
-- Loosen the hose clamps -2- to clamp off the coolant hoses with the :3094 and remove them.
-- Remove the Transmission Fluid Cooling Valve -N509-.