LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 937 (Engine Cooling System (Service Information - CEUC, CTGE)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Coolant Pipe On Transmission, Removing And Installing >> Vehicles with an Automatic Transmission 0BK

Vehicles with an Automatic Transmission 0BK

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
GWWA19-11762Courtesy of AUDI OF AMERICA, LLC

-- Fold the heat shield boot slightly upward.

-- Remove the bolts -1 and 2-.

-- Place the :VAS6208  under separating point.

-- Loosen the clamps -arrows- to remove the coolant hoses for the coolant pipe on the right side of the transmission and then remove the coolant pipe.

scientia non olet · About LEMON Manuals