Checking The Pressure Relief Valve In The Version 1 Cap
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Position the :VAG1274B with :VAG1274B/15 on the cap.
-- Generate approximately 2.0 bar (29.0 psi) pressure using the cooling system tester hand pump.
BLUE CAP:
- The pressure must lower to 1.6 to 1.4 bar (23.2 to 20.3 psi) and stay there.
BLACK CAP:
- The pressure must lower to 1.8 to 1.6 bar (26.1 to 23.2 psi) and stay there.
ALL CAPS:
-- If the pressure relief valve does not react as specified, replace the cap.