LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 936 (Engine Cooling System (Service Information - CYNB - 2 Of 2)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Engine Temperature Control Actuator -N493-, Removing And Installing >> Removing >> Notes

Engine Temperature Control Actuator -N493-, Removing And Installing: Removing: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Required preliminary work. Refer to ENGINE TEMPERATURE CONTROL ACTUATOR -N493-, REMOVING AND INSTALLING .

-- If installed, remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -arrow- for the Engine Temperature Control Actuator -N493-.

GWWA19-11486Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 to 5-.

scientia non olet · About LEMON Manuals