Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal and Note The Following:

Replace the bolts that were tightened with an additional turn after removing them.
Note the toothed belt sprocket installation location, refer to -item ) OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT).

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Additional procedures. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .