Tires, Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Tires which have been filled or sealed with tire sealant, must be drained before removing from wheel.
WARNING:
- Prevent tire sealant from making contact with eyes and skin.
- It is harmful to health, can cause eye irritation and allergies.
- Wear protective gloves and glasses when removing tires.
-- Set wheel on an even surface.
-- Remove tire valve insert.
-- Carefully drill hole in tire in area of shoulder using suitable drill or cutter.
-- Hold wheel over drip tray and allow tire sealant to drain.
-- Remove tire from rim.
-- Clean wheel rim, for example using a damp cloth.