Bumper Cover Mount, Removing And Installing, Vehicles Through My 2014: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the headlamp housing. Refer to HEADLAMP, REMOVING AND INSTALLING .
-- Audi S6/RS6, left side: Remove the secondary air injection pump motor with the bracket. Refer to SECONDARY AIR INJECTION SENSOR 1 -G609-, REMOVING AND INSTALLING [FOR ENGINE(S) CTGE, CEUC] and SECONDARY AIR INJECTION PUMP MOTOR -V101-, REMOVING AND INSTALLING [FOR ENGINE(S) CREC, CREH] .
-- Remove the bolts -2, 3 and 4-.
-- Remove the mount -1-.