LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Exterior System (Front - Service Information)) >> 50 Body Front >> Fender >> Fender, Removing And Installing >> Lower Fender Bracket, Removing And Installing >> Removing

Lower Fender Bracket, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the fender. Refer to FENDER, REMOVING AND INSTALLING .

-- Remove the headlamp housing. Refer to HEADLAMP, REMOVING AND INSTALLING .

-- On the left side: free up the wiring harness and the windshield washer fluid hose for the headlamp washer system -arrows-.

GWWA50-10494Courtesy of AUDI OF AMERICA, LLC

-- Right: free up the wiring harness.

-- Remove the bolts -2 and 3-.

-- Remove the lower bracket -1-.