LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Exterior System (Front - Service Information)) >> 50 Body Front >> Bulkhead >> Plenum Chamber Cover, Removing And Installing >> Cowl, Removing And Installing >> Installing

Cowl, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal and Note The Following: 

NOTE:

Be careful not to damage the cowl panel otherwise water can get into the A/C unit via the air intake shroud.

The plenum chamber cover cowl panel must lock completely into the windshield frame.

scientia non olet · About LEMON Manuals