Battery Tester with Printer :VAS5097A Device Description
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- LED green, "Device in use"
- LED red, "Device connected with terminals reversed"
- LED red "Battery cannot be tested", the Battery -A- must be replaced.
- Start button
- Cold cranking output selector switch
- ON/OFF function switch
- Sliding switch (battery hook-up to the Battery -A- /at jump start point)
- Paper-feed -button
- Printer