Battery Charger :VAS5906 Device Description
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
The :VAS5906 was developed especially for charging the vehicle electrical system while the vehicle is on display.
It supplies for automatic charging of 3 - 300 Ah for starter batteries.
The 14.4 V maximum charging voltage is not exceeded. All electrical consumers will be supported up to 30 A by the support charging.
After the Battery -A- is completely charged, the :VAS5906 switches into the maintenance charging for long-term operation.
The :VAS5906 starts automatically and does not need any adjustments. Only the charging terminals and the network cable need to be connected.
For more information. Refer to the :VAS5906 Operating Instructions.
- 25% charge display
- 50% charge display
- 75% charge display
- 100% charge display
- Ready-to-use display
- Pushing the START/STOP and Setup buttons will stop and start the charging process. Enter into the setup menu and select characteristic line type (hold for 10 seconds)
- Display malfunction